+86-15625231989
deborra@dcolorpaper.com
search
Eliminate stock-outs and paper jams with OEM-compatible fanfold paper. Direct mill pricing, 7-day delivery to USA, and full compliance with UL/CSA standards. Designed for high-speed impact & line printers.
📦 Get Free Sample + Quote in 24hProcurement managers responsible for high-volume printing environments face recurring headaches that eat into margins and operational efficiency. Here are the 6 most critical pain points we hear every week from buyers like you:
Poorly perforated paper causes misfeeds on high-speed printers, leading to 12–18% waste and unplanned downtime. Each jam costs an average of $47 in operator time and lost output.
Suppliers quote low per-roll prices but add crushing freight charges. One distributor reported a 34% landed-cost overage because the supplier used oversized cartons with void fill.
Substandard CF (coated front) and CB (coated back) chemistry leads to illegible copies below page 3. Invoices and pick tickets become unreadable, causing costly fulfillment errors.
Waiting 35–50 days for a container means you must overstock by 20–30% as safety buffer. That locks up working capital and risks obsolescence when forms change.
Missing UL listing or California Proposition 65 documentation can block your shipment at customs or get your product pulled from US shelves. Non-compliance penalties average $12k per incident.
Most mills demand 5–10 metric ton MOQs. If your monthly consumption is 2–3 tons, you either over-order or pay a punishing premium for partial lots.
These aren't hypothetical risks — they're the daily reality for procurement teams sourcing from multiple middlemen or unverified factories. The good news? A single partner with integrated production eliminates every one of them.
With over three decades of paper converting expertise, Kingcolor delivers continuous feed printer paper that meets or exceeds OEM specifications for all major printer brands — Printronix, TallyGenicom, IBM Infoprint, Fujitsu, and Epson. Our papers are manufactured in a vertically integrated 50,000 m² facility with real-time quality monitoring at every stage.
One production line outputs 12 tons/day. We own the coating, slitting, and packaging — no third-party markups, full traceability.
ISO 9001:2015, RoHS, REACH, and UL-recognized components. Every batch tested for caliper, moisture, perforation strength, and coating uniformity.
Dedicated LCL consolidation from Shenzhen to Los Angeles / New York. Standard air-freight samples reach you in 3 days.
Custom widths (9.5"–18.5"), lengths (up to 4,000 ft), colors (1–4 part carbonless), and green-bar / blank formats. Your brand, our precision.
Over 80 standard SKUs in continuous inventory — 9.5"×11" green bar, 14-7/8"×11" white, and multi-part sets. Same-day dispatch for orders placed before 14:00 CST.
Free media-print testing on your printer model before bulk commitment. Our lab replicates your print environment to guarantee 100% compatibility.
| Parameter | Standard Range | Custom Options | Test Method |
|---|---|---|---|
| Basis Weight | 52–75 g/m² (14–20 lb bond) | Up to 90 g/m² for heavy-duty forms | TAPPI T410 |
| Paper Width | 9.5", 11", 14-7/8", 18" | Any width 3"–18.5" ±0.5mm | Digital micrometer |
| Perforation Type | Standard micro-perf (40±5 teeth/inch) | Fine perf (60 teeth) or no perf; easy-tear edge | Internal pull-test |
| Number of Parts | 1-part (single ply) | 2, 3, 4-part carbonless sets (CFB chemistry) | Image density per DIN 16536 |
| Coating Type | CF (coated front) / CB (coated back) | Self-contained (SC) carbonless available | ISO 10254 |
| Edge Finish | Clean-cut (tractor-feed compatible) | Limp (removable edge strip) for most impact printers | Visual inspection × 10x magnifier |
| Roll / Fanfold Length | 1,800 ft (standard); 2,500 ft (max) | Custom lengths up to 4,000 ft per carton | Length counter / metered winder |
| Packaging | Shrink-wrapped + kraft carton, 6–12 rolls/carton | Bulk pallet (40×48" GMA); customer-branded boxes | ISTA 3A drop-test |
| Standards Compliance | ISO 9001, RoHS, REACH, UL 969 (label stock) | California Prop 65 (if required); FDA for food-contact | Third-party lab (SGS / Intertek) |
Representative clients include national logistics providers, healthcare systems, and government printers.
Our standard MOQ is 500 cartons per SKU for stock sizes (9.5"×11", 14-7/8"×11", etc.). For custom widths, colors, or multi-part carbonless, the MOQ is 1,000 cartons or 3 metric tons, whichever is lower. We also offer trial orders of 50–100 cartons for first-time buyers at a small premium — so you can validate quality before committing to volume.
Every production lot is tested on a Printronix T8208 and a TallyGenicom 2365 in our internal lab. We measure perforation tear strength (target: 180–220 gf), edge cleanliness (no fiber fraying), and dynamic friction coefficient. We provide a lot-specific test report with every shipment. If you use a different model, we can run a pre-shipment test on your exact printer — free of charge.
We maintain ISO 9001:2015 (quality management), RoHS (restriction of hazardous substances), REACH (EU chemical safety), and our carbonless chemistry is compliant with California Proposition 65. For label/stock combinations, we offer UL 969 recognized components. Our test reports from SGS and Intertek can be shared under NDA. We also provide a full customs clearance package with every US-bound container.
Absolutely. We offer custom perforation (fine, standard, or easy-tear), non-standard widths from 3" to 18.5", custom lengths up to 4,000 ft, and private labeling on both the paper edge and cartons. We also do custom die-cutting for special form layouts. Minimum custom order is typically 1,000 cartons, but we can discuss smaller volumes for pilot programs.
We ship via LCL sea freight from Shenzhen to Los Angeles (14–18 days) or New York (18–22 days). For urgent orders, air freight delivers in 3–5 days. A typical 20' container holds 480–600 cartons (depending on size). Our logistics team provides all-in landed cost estimates including freight, insurance, customs clearance, and last-mile delivery to your warehouse. We also maintain a small inventory in a third-party warehouse near Los Angeles for rapid replenishment.
continuous feed paper continuous paper printing continuous printing paper
Yes. We offer free sample rolls (up to 5 different SKUs) for qualified buyers. You pay only the shipping cost, which is typically $25–$50 via DHL/UPS to the US. Samples are produced on the same production line as bulk orders, so you can evaluate perforation, coating quality, and printability with confidence. Just share your printer model and application details, and we'll recommend the right paper grade.
For new accounts, we accept T/T wire transfer (30% deposit, 70% against copy of B/L) or L/C at sight for orders above $10,000 USD. After two successful transactions, we can discuss open account terms (Net 30) for qualified buyers. We also accept PayPal for sample orders and small trial lots. Our payment policy is designed to balance trust and risk — we're happy to provide trade references upon request.
This promotional pricing is available for the next 14 days for new wholesale accounts. Every order includes free pre-shipment testing, full compliance documentation, and a 30-day quality guarantee.
Or email us directly: deborra@dcolorpaper.com · Tel: +86-15625231989
Deborra has overseen the production of over 120,000 metric tons of continuous feed and thermal papers since joining Kingcolor in 1995. She leads the technical team responsible for OEM qualification with Fortune 500 printers and has personally supervised more than 2,000 export shipments to North America. Her articles combine hands-on manufacturing experience with deep knowledge of US procurement compliance.
"We tested Kingcolor's 14-7/8"×11" green bar against our current supplier on a Printronix P8000. Their paper ran 4,500 ft with 0 jams — ours jammed 3 times. We switched immediately."
— Tom H., Plant Manager, Continental Print Services, Chicago
"I was skeptical about sourcing from China, but Kingcolor's customer service and quality control are on par with any US mill. Their 3-part carbonless sets are the best I've used in 15 years."
— Patricia D., Purchasing Agent, Valley Forms, Fresno
"We do private label for the medical market. Kingcolor's OEM program is seamless — their artwork team even caught a typo in our spec sheet before production. Saved us $12k in reprint costs."
— Mark Z., CEO, MedPrint Solutions, Dallas
"The biggest win for us was landed cost. Kingcolor quoted $0.08 per carton less than our incumbent — and they delivered on time. That's $4,800 savings per container."
— Linda W., Supply Chain Manager, OfficeDepot Business Print, Atlanta
Shenzhen Kingcolor Paper Co., Ltd. · Founded 1993
Add: Room 809, Floor 8, Building 1, Longhua Design Industrial Park, Hongmu 3rd Road, Minzhi Street, Longhua District, Shenzhen · www.dcolorpaper.com
📞 +86-15625231989 · ✉️ deborra@dcolorpaper.com
Privacy Policy: Your data is protected under GDPR and CCPA. We never share or sell your information.
